Welcome to Changzhou yuen machinery equipment co. LTD!
Hot Keywords:     Automatic single end terminal    Ultra static terminal    Strip and strip punch
NewsNEW CENTER
CONTACT USCONTACT US

Conatct:Mr Wu

Mobile:+Q:2223857802

Tel:+Q:2223857802

E-mail:898063083@qq.com

Add:4-2026, yikang electromechanical plaza, tianning district, changzhou city

NewsYour current location: Home > News
Five - wire multi - function computer stripping line head stripping failure solu
Release:2018-04-19Browse 709 
Details

As long as it is mechanical equipment, there must be a failure, it is inevitable, multi-function computer wire stripping and five line as one of the machinery and equipment, and also will have various problems of time, now, the company for us to explain the computer wire stripping machine thread dial solution doesn't open fault.

1. Check the cutting depth of the line head. When the cutting mark is too shallow, the size of the cutter value parameter should be adjusted.

2. The pressure of the feed wheel is not enough, so the pressure of the feed wheel should be increased.

3. There may be stolen goods on the incoming wheel, which shall be cleaned.

4. The setting parameters for returning knives may be too large.

5. Check whether the blade has been worn and become blunt.



Link: 常州360推廣
  Copyright  Changzhou yuen machinery equipment co. LTD  All Rights Reserved  【Login】
TopQQMegWechatBottom
QQ
點擊這里給我發(fā)消息
QQ
點擊這里給我發(fā)消息
Welcome to leave a messageClose
Contact:
Tel:
  
WeChat, scan, plus attentionClose